Posts
Tips on Ludwig Stand destruction? (Not what it sounds like......)
They only knurled the tube to give it a better fit. I have used a block of a hard wood like maple and hit it with a hammer to loosen the castings. Y...
13 years ago1964 Ludwig BOP Ringo Kit - Input Please
Nice score. The L arm on your console is not original. It should be equal length on both ends and have the diamond patterned knurling. They are not t...
13 years agoValue of 1980s Rogers Drum Set
Yep. Island Music era drums. Unfortunately they are not worth much.
13 years agoFilling holes in shell
are you going to wrap them or give them a natural finish? Dowels will look like crap if you are doing a natural finish. The face of the plug will be...
13 years agoGreyhound Bus Service for Delivery
From leedybdp...
13 years ago1978-79 Ludwig USA kit - what's it worth? Help!
If the year he gave is correct they are the 6 ply with inner and outer maple with inner plies of poplar. I think the 4 ply super classics came much la...
13 years agoRemoving wood veneer from tom
is the veneer not factory applied?
13 years agoLudwig Rocker Lugs
those same lugs were used on the Ludwig Standards as well. Probably pretty easy to find on ebay.
13 years agoRare Camco Pedal
Most likely the first generation of the split footboard after Camco bought the rights to the pedal from Martin. Not my pedal. [IMG]http://www.drumfo...
13 years agoGreyhound Bus Service for Delivery
I've done it, although not with drums, but a fairly large part of a car's sheet metal. As long as it's packed well, it will probably have a much gentl...
13 years agoCracked Slingerland
I would measure the length of the crack and then just keep an eye on it. If it stays the same and is not causing problems, I would leave it alone.
13 years agoLudwig 1123 Spur Lok question.
That is correct if I am following you correctly. I would cut some strips of an aluminum can. Put the rod in the hole so it is oriented correctly and...
13 years agoCracked Slingerland
What does it look like on the inside?
13 years agoLudwig 1123 Spur Lok question.
It is supposed to be held in place by the hinge pin which should fit into that depression in the rod. can you see part of the hinge pin when you look...
13 years agoStupid Nickel...
I have used the Mothers mag polish and it works well. I usually use Flitz and have used simichrome. I picked up some of those Cape Cod cloths a whil...
13 years ago