Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 187.98330%

Rogers Cleveland Era - GOLD SPARKLE - 20, 12, 16 Last viewed: 2 hours ago

Loading...

$1100 + Ship

Here is a beautiful CLEVELAND era - Rogers Holiday kit in the stunning gold sparkle.

The drums are in great condition all around. The wrap is seasoned evenly around the entire kit. They all match very well.

The bottom of the bass drum is slight brighter than the rest of the kit.. but not by a whole lot. The hardware across the drums is very clean with minimal pitting or issues.

I will get photos of the interiors of the drums soon. They are not mint.. but are still in very good condition. There are NO extra holes on these drums.

The tom arm is included although it is beat up, bent, and seemed to have had sides replaced on it.

Here is a break down of each drum.

8x12:

This drum has strong wrap with a Cleveland era tag. The top (batter) hoop is a Rogers TALL BOY hoop.. while the bottom (resonant) is a replacement.. possibly a ludwig. All of the lugs are in great condition and the swivo mount looks and works beautifully! One reinforcement ring needs to be glued and clamped. It isn't bad at all.

16x16:

The floor tom is in great condition. All of mounts and lugs are in great condition. The wrap is super strong all around. The hoops look to have been replaced at some point. Interior looks good with a Cleveland era Tag. This drum is missing the muffler.. One reinforcement ring needs to be glued and clamped. It isn't bad at all.

14x20:

The bass drum is a cannon! The wrap is strong with the bottom being just slightly brighter than the top. All of the mounts and collets look and work great. The mount configuration is a common one.. it pushes the rack tom further to the side.. unless mounted like i have it in the photos. Still all original and factory. The resonant side hoop had broken at one point and the previous owner had it repaired by glueing a piece of wood and color it to match the kit. The hoop is stronger than ever now.. and the mod can be hidden under the drum. It was very well done. This drum is also a Cleveland but the interior tag is now missing.

Posted on 13 years ago
#1
Posts: 1597 Threads: 96
Loading...

ahhhhh the tom mount is upside down I do believe and would work much better ball up.... :) good luck with your sale.

Posted on 13 years ago
#2
Loading...

From Mike T

ahhhhh the tom mount is upside down I do believe and would work much better ball up.... :) good luck with your sale.

Close! Its actually not upside down. Its a wonderbar snare arm.. which were made basically backwards and bent. It will only work in that orientation. Wrong part really. Unfortunately i just didn't have an extra tom arm for the photo.

Posted on 13 years ago
#3
Loading...

Hi Optik,

I have 2 Rogers single tom arms FS....

[email]Blairndrum@aol.com[/email] if interested........

Blair

"Always make sure your front bottom BD lugs clear the ground!"
Posted on 13 years ago
#4
Loading...

Thanks Blair.

I've got one already on the way

-Chris

Posted on 13 years ago
#5
Loading...

Okie Dokie

"Always make sure your front bottom BD lugs clear the ground!"
Posted on 13 years ago
#6
Loading...

Bump! New Low Price

Posted on 13 years ago
#7
Posts: 1597 Threads: 96
Loading...

From optikdrummer

Close! Its actually not upside down. Its a wonderbar snare arm.. which were made basically backwards and bent. It will only work in that orientation. Wrong part really. Unfortunately i just didn't have an extra tom arm for the photo.

It is the same as the original Rogers double tom dogbone mounts and will work just fine by swapping ends in fact it has more adjustment that way try it you will like it ... IM humble O

Posted on 13 years ago
#8
  • Share
  • Report
Action Another action Something else here