Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 141.09395%

Out of round metal shell Last viewed: 23 minutes ago

Posts: 1344 Threads: 172
Loading...

Hello, I have a 60s keystone badge Supraphonic with a slightly out of round shell and I'm wondering if anyone out there has had any success in getting a Supra, or any other type of metal shell snare drum back in round?

A drum head will sit on the top bearing edge and will spin freely on the bearing edge, but on the reso side I have to jam the head on. It seems like perhaps the drum was dropped on a lug or something.

Any success stories out there on getting out of round metal shells back in round?

Cheers.

Posted on 2 years ago
#1
Posts: 350 Threads: 33
Loading...

This is always a tough nut to crack.

Brass shells can be manipulated to some in degree by hand, but steel or aluminum shells aren't as flexible.

My best guess here would be to locate a machine shop that has a rolling machine with a pin that would fit between the center bead of the shell and the lip. It might screw up the finish or chrome work though.

1974-75 Rogers Starlighter IV New England White 13/16/22 (w/Dyna)
1964-67 Rogers Blue Glass Glitter 12/14/16/20
early Oaklawn Camco Blue Moire 12/14/20
1926 Super Ludwig 5x14
1960-ish Ludwig COB 5x14 Super Sensitive
1960-ish Ludwig COB 6.5x14 Super Sensitive
1970 Ludwig COB Cut-Badge 5x14 Supra Phonic

Looking for a Camco Aristocrat SD in Blue Moire!!
Posted on 2 years ago
#2
Posts: 1344 Threads: 172
Loading...

This is always a tough nut to crack.Brass shells can be manipulated to some in degree by hand, but steel or aluminum shells aren't as flexible. My best guess here would be to locate a machine shop that has a rolling machine with a pin that would fit between the center bead of the shell and the lip. It might screw up the finish or chrome work though.

Thanks for the reply, kdg. I had thought of this too, but I'll probably just jam the reso head back on and pretend it's OK. I took the whole drum apart. Here's the shell. Chrome looks good. It should look good after a serious cleaning.

1 attachments
Posted on 2 years ago
#3
Posts: 350 Threads: 33
Loading...

Another Idea would be to contact Remo and special order a "classic fit" reso head, so that there would be more clearance.

1974-75 Rogers Starlighter IV New England White 13/16/22 (w/Dyna)
1964-67 Rogers Blue Glass Glitter 12/14/16/20
early Oaklawn Camco Blue Moire 12/14/20
1926 Super Ludwig 5x14
1960-ish Ludwig COB 5x14 Super Sensitive
1960-ish Ludwig COB 6.5x14 Super Sensitive
1970 Ludwig COB Cut-Badge 5x14 Supra Phonic

Looking for a Camco Aristocrat SD in Blue Moire!!
Posted on 2 years ago
#4
Loading...

I would measure the diam of the shell to find its widest point. Then, I would protect the shell with some padding, and put 3 bricks on top of the widest part for a few days. Then take off and see if the shell is back, or close to back in the round.

Posted on 2 years ago
#5
Posts: 1344 Threads: 172
Loading...

From Retrosonic

I would measure the diam of the shell to find its widest point. Then, I would protect the shell with some padding, and put 3 bricks on top of the widest part for a few days. Then take off and see if the shell is back, or close to back in the round.

I like the idea. It makes sense. I'm a little hesitant to do anything with it. I was once able to get an egg shaped aluminum shell back in round, but it wasn't a beaded shell and it came at a cost. The brushed aluminum finished got scratched up really bad, but the shell was perfectly round in the end. I have this metal band thing, not too unlike a 14" drum hoop. I just passed the warped shell through the hoop and it straightened right out. I really had to hammer the hoop over the shell using a chisel like tool and a mallet. In the end the shell looked wrecked, but it was perfectly in round. I wouldn't attempt it on the Supra, especially given that the shell looks really great with no flakey chrome, so, I think I'll just pretend that I never saw the out of round reso side. :)

Posted on 2 years ago
#6
Loading...

I hear you!

hey, I LOVE that green swirl wrap on your MIJ set. Really beautiful!

Posted on 2 years ago
#7
Posts: 1344 Threads: 172
Loading...

From Retrosonic

I hear you! hey, I LOVE that green swirl wrap on your MIJ set. Really beautiful!

Yeah. Cool looking set. I sold it a couple of weeks back. Only after I sold it I found a floor tom for sale. It wasn't an exact match, but close enough. Doh! Oh well, easy come, easy go.

Here's that Supra..

Posted on 2 years ago
#8
  • Share
  • Report
Action Another action Something else here