Member
|
Join Date: Jan 2013
Posts: 9
|
![]()
i have a pearl tiger kit from i think 60s or 70s. it's missing a few tension rods for the floor tom. they are 6 inches long.
anybody got a few they can part with? thanks! jon |
Member
|
Join Date: Jan 2013
Posts: 9
|
![]()
also wondering if anyone knows what dimensions the legs would be on a pearl kit of this vintage? Are they metric or??
(The ones I got with the drum are quite short) |
Member
|
Join Date: Jan 2013
Posts: 9
|
![]()
this is old but i am still looking for a few of these.
i understand that they are called "coarse thread" as they are wider thread than standard rods. Anybody got any ideas on good places to look? |
Vintage Drum Guru
|
Join Date: Aug 2011
Location: Sydney, Australia
Posts: 3,462
|
![]()
I'm guessing that it's a 14x14" FT with the single lugs ? .. If so that will be the metric thread.. I have seen them on Ebay from time to time..
Cheers John (Measure the length in Millimetres Maybe 145??) Last edited by longjohn; 09-17-2015 at 05:35 PM. |
Vintage Drum Guru
|
Join Date: Dec 2012
Location: Quebec Canada
Posts: 1,292
|
![]()
someone here (i can't remember who) turned me on to the fact that children's drum kits use metric t-rods. I have been robbing t-rods off these kits to restore MIJ kits whenever I can't find any.
__________________
1964 Ludwig Champagne Super Classic 1970 Ludwig Blue Oyster Super Classic 1977 Rogers Big R Londoner 5 ebony 1972/1978 Rogers Powertone/Big R mix ebony 60's Ludwig Supersensitive Pearl B4514 COB snare ( the SC snare) Pearl Firecracker PJL WMP maple snare Odds & Sods Sabians, Paistes, Zildjians, Zyns, UFIPs, MIJs etc Item may be subject to change! |
Member
|
Join Date: Jan 2013
Posts: 9
|
![]()
thanks for the reply John.
It is a single lug floor tom and it is 14" in diameter. It's 150 mm. I don't see any on ebay ![]() i found these 6" Cannon ones but not sure if the thread will match - can't seem to find specs onlline. [ame="http://www.amazon.ca/Cannon-632TS6-6-Inch-Tension-Rods/dp/B00DDJS70A/ref=sr_1_18?ie=UTF8&qid=1442535281&sr=8-18&keywords=6%27%27+Tension+Rods"]Cannon 632TS6 6-Inch Tension Rods: Amazon.ca: Musical Instruments, Stage & Studio@@AMEPARAM@@http://ecx.images-amazon.com/images/I/51hI2OBDZlL.@@AMEPARAM@@51hI2OBDZlL[/ame] |
Advanced Member
|
Join Date: Oct 2014
Location: Montana
Posts: 262
|
![]()
15 CM?
It would probably be in your best interest to take a rod to a hardware store or somewhere where they can tell you the thread count/ size on those. If those lugs have regular swivel nuts inside you may be able to change them to fit the Cannon rods you found on Amazon. Your drum would be put together and playable until you can find some originals.
__________________
Wanted: Pearl President floor tom in Golden Grain wrap and rack tom in Tiger Eye (root beer) wrap. |
Vintage Drum Guru
|
Join Date: Jan 2011
Location: Canada
Posts: 2,148
|
![]()
I had a set of vintage pearl (Valencia's) from the 60s..
I might have some of the long rods.... Also the legs for the flr Tom, look correct..
__________________
![]() ROGER's 1964 Cleveland,.18/14/12 in WMP 1966 Cleveland, 20/14/12 O'natural. Fullerton,...20/16/13/12 Silver Glass WFL 1957 B/R Super Classics In WMP Snares.. Wood & COB Powertones, Wood & COB Dynasonics, 57 Jazz Festival Zildjian avedis cymbals. 40s/60s era. |
Member
|
Join Date: Jan 2013
Posts: 9
|
![]()
Sorry 15 CM - not MM - D'oh!
|
«
Previous Thread
|
Next Thread
»
Thread Tools | Search this Thread |
Display Modes | |
Posting Rules
|