Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 189.98747%

More Rogers Dayton stuff...

Loading...

12 small HEAVY lugs

16 large HEAVY lugs

I find these heavy lugs give Rogers that great sound...

Tried putting light weight Fullertons on a Cleveland kit once..

.sounded HORRIBLE!

These are in quite nice condition....so many you see have some pretty good amount of wear on the top of the lugs...these have minimal wear....

$5 each,plus shipping....

min order...8 lugs please...

........................................

Black pad snare/Tom internal muffler..great shape..$35 plus ship...

""............."...."......................"...

Gloss black (Ebony) 8 by 12 shell WITH Memriloc mount that mounts to drum shell...but...

This is Sans Memriloc clip that goes into mount,and mounts on the round tom arm shaft....

They eVen went as far as putting a clean,Big R sticky badge on the shell...

$45 plus shipping....

Both bearing edges are fine!

Fair to Good condition on the outside wrap......(scratches etc)

..............................................................................

14 by 20 Gloss Black shell...

Was also drilled for Memriloc mount..so,2 smaller holes,1 large.....

Did a great job of doing so..

Drilled it near the front of the BD very evenly centered,and used a fresh bit to drill the Quarter size hole..so would be easy to fill it,as it is not jagged....

$60 plus ship..Both bearing edges are fine!...shipped in BRAND NEW U-Haul TV/Microwave box,with bubble wrap..lots of tape .

Fair to Good in the finish department...(scratches etc)

Thanks for looking...

"Always make sure your front bottom BD lugs clear the ground!"
Posted on 13 years ago
#1
Loading...

Update..

Just sat outside in the shade,and did the Novus 2 magic with both shells...

All sorts of fine scratches came off of the fiinish,so. now I would rate them as Good To Very Good!..nice and shiny.....Clapping Happy2

"Always make sure your front bottom BD lugs clear the ground!"
Posted on 13 years ago
#2
  • Share
  • Report
Action Another action Something else here