Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 189.58664%

1980's Pearl lugs that will work on Rogers B and B drums! Last viewed: 5 hours ago

Loading...

I have close to a 100 of these all told...

19 snare ones..

27 large BD lugs..

52 small tom lugs

Will take $100 plus ship for all!

$1.50 each if buying less then all....20 item min order at this price please......

Need cleaning,but at $1 each on the whole lot..,I will leave that to you...

Will also include mounting screws....

1 attachment
"Always make sure your front bottom BD lugs clear the ground!"
Posted on 12 years ago
#1
Posts: 5356 Threads: 87
Loading...

That's interesting they fit the B and B shells. Are the small lugs the same spacing as the peanuts? 1 5/16"? That's a great option to somewhat expensive and problematic BnB's. Clapping Happy2

Glenn.

Not a guru just havin fun with some old dusty drums.
Posted on 12 years ago
#2
Loading...

Hole spacing..

Snare lugs....2" from center of 1 hole to center of other hole

BD lugs...same..

small lugs (toms)...have to check yet...

"Always make sure your front bottom BD lugs clear the ground!"
Posted on 12 years ago
#3
Loading...

1-1/2" on the small ones...for toms...

"Always make sure your front bottom BD lugs clear the ground!"
Posted on 12 years ago
#4
Posts: 430 Threads: 15
Loading...

From blairndrums

Hole spacing..Snare lugs....2" from center of 1 hole to center of other holeBD lugs...same..small lugs (toms)...have to check yet...

On the early b&b drums, the snare/toms used the same large lugs as the bass. But after a while they came up with a smaller lug for the toms and the snare and those are much more common. They also used a very small 'peanut' lug, only on the ride toms, for a short interval.

Posted on 12 years ago
#5
  • Share
  • Report
Action Another action Something else here