Posts
Rogers b&b shells wanted
bump to the top
11 years agoRogers Red Onyx "Lefty" Bop kit on eBay
I enlarged the photo and these are the serial numbers I see: floor tom - 112xxx bass - 89xxx tom - 81xxx snare 17xxx The numbers are not that far ap...
11 years agoSwivomatic Mount Hex Bar Size?
It's simply supply and demand: the short arms are plentiful, the long arms are not. It's not so easy to add a new hex rod to a mount, they are welde...
11 years agoRogers b&b shells wanted
From statuscymbal...
11 years agoRogers - Flat Grey vs. Gloss Grey Shell Paint
Yes, I rewrapped it in WMP. It was in rough shape when I got it, already stripped and beat up. But I had it looking pretty nice when I sold it to bruc...
11 years agoRogers - Flat Grey vs. Gloss Grey Shell Paint
I had an 18-12-14 Cleveland beavertail kit that wore factory lacquer inside. Probably made for an endorser. Sold it to Bruce Felter 8-9 years ago.
11 years agoRogers b&b shells wanted
Got a BDP 20 and 12, now I need a ft shell for b&b lugs, also needs to be a Keller shell with the sharp edges.
11 years agoRogers - Flat Grey vs. Gloss Grey Shell Paint
The theory has been that they wanted to make the snare a little brighter, so they used a more reflective paint. Sounds reasonable enough. I have neve...
11 years agoRogers hardware
How much for the t/o?
11 years agoNew Aftermarket Swivomatic Collets
I've used a number of Dave Drew's repro collet noses over the years, never had a problem. The style and machining of the collet plates did vary widel...
11 years agoDynasonic values hitting bottom?
From Rik_Everglade...
11 years agoRogers Comet Outfit w/additional Holiday FT
Small washers at the top of the lug, large washers at the bottom. The large lug washers are the same size as the smaller washers on the swivo mounts.
11 years agoRogers Comet Outfit w/additional Holiday FT
Rogers never used those screws in the Cleveland era or any other. Those must have come from the hardware store,,,
11 years agoRogers b&b shells wanted
Ok, got that 20/12 in BDP from Bill yesterday. Now I need a floor tom shell in BDP, drilled for b&b lugs, and built with the later Keller shell that...
11 years agoRogers b&b shells wanted
Sorry, I'm looking for early b&b shells, 1959-62, still with the original wrap.
11 years ago