Search
Register
Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 179.56576%

Wanted Imperial Lugs And A Few Era Correct Tension Rods Last viewed: 20 hours ago

Posts: 31 Threads: 8

I have a Ludwig Pre Serial Keystone Badge COB Supra phonic Supraphonic Snare Drum and need a couple decent shape Imperial lugs and 10 or so era correct Tension Rods

1 attachment
20150416_161328_opt.jpg
39.5 kB
Posted on 10 years ago
#1
Posts: 6583 Threads: 644

Please PM me a pic of the rods....with a YARDSTICK next to 1...starting at the flared out collar...

"Always make sure your front bottom BD lugs clear the ground!"
Posted on 10 years ago
#2
Posts: 31 Threads: 8

From blairndrums

Please PM me a pic of the rods....with a YARDSTICK next to 1...starting at the flared out collar...

I did not see where I could send a picture in a PM; But here is a pic another member sent me of the correct tension rod. The ones on the drum now are mismatched so I do not know which ones are correct.

Thank You; Dennis

1 attachment
Drum Tension Rod.jpg
138.3 kB
Posted on 10 years ago
#3
Posts: 6583 Threads: 644

I probably have the correct ones...but need to know if these are the exact ones. you need!

"Always make sure your front bottom BD lugs clear the ground!"
Posted on 10 years ago
#4
Posts: 31 Threads: 8

From blairndrums

I probably have the correct ones...but need to know if these are the exact ones. you need!

I have been told that 2 1/16" end to end is the correct size but at least 10 that were on the drum were 2" so I do not know for sure?

Posted on 10 years ago
#5
Posts: 958 Threads: 138

The one pictured is the correct rod.

Nevin

Posted on 10 years ago
#6
Posts: 6583 Threads: 644

Thanks Nevin..let me check..should have some!

"Always make sure your front bottom BD lugs clear the ground!"
Posted on 10 years ago
#7
Posts: 31 Threads: 8

From blairndrums

Thanks Nevin..let me check..should have some!

do you have 20 of the ones in the picture with washers in good shape?

Posted on 10 years ago
#8
Posts: 6583 Threads: 644

will check by tonight..might have 8-10..doubt 20....

"Always make sure your front bottom BD lugs clear the ground!"
Posted on 10 years ago
#9
Posts: 6583 Threads: 644

I was close..only have 6.....

"Always make sure your front bottom BD lugs clear the ground!"
Posted on 10 years ago
#10
  • Share
  • Report
Action Another action
Something else here