Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 179.76618%

Rust never sleeps Last viewed: 6 seconds ago

Loading...

if you have a lot of hardware to clean/de rust go to Harbor Freight and purchase a Vibratory polisher and some fine crushed walnut shell medium .....will polish up all your hardware as good as anything you can imagine..... add a little liquid compound and car wax and they will sparkle

Posted on 9 years ago
#21
Posts: 6170 Threads: 255
Loading...

From Drumguy1988

Thanks Mike. I put 1 rod and Claw in and am now off to work so I will check them when I get home. It's the blue stuff like you said It's called DAWN Ultra and It was a Duck on it. If it's good enough for an oily Duck it's good enough for drum parts LOL!!!!

That's the stuff. I usually just cover the parts in the dawn and add water and mix them up a bit.

Mike

Posted on 9 years ago
#22
Guest
Loading...

From Sleepy57

if you have a lot of hardware to clean/de rust go to Harbor Freight and purchase a Vibratory polisher and some fine crushed walnut shell medium .....will polish up all your hardware as good as anything you can imagine..... add a little liquid compound and car wax and they will sparkle

I'll try that if everything else fails.

Posted on 9 years ago
#23
Guest
Loading...

From salty 1322

Hey, Drumguy, I don't use steel wool on anything! You may think that you're doing no harm but, in actuality you're dulling the surface with each stroke. It doesn't matter what the grade. Microscopic scratches are left behind on the chrome. Once they are there, they are there forever (short of re-chroming). Try this: Take an old pair of dollar store sunglasses and "polish" the lenses with whatever grade of steel wool you want. Now put them on. I think you'll understand what I mean. Even the ooo grade leaves scratches. This is entirely up to you of course. Brian

You given me something new to think about. I've been using 0000 steel wool on lugs, mounts, any chrome part and they've always turned out great. Never thought It was doing damage. So what's the best way clean dirty parts????

Posted on 9 years ago
#24
Guest
Loading...

Well I found Evapo-Rust. Just put a couple parts in it and we'll see what it does. Here's a pic. Do I need to cover the tray over with something or just leave it open???

1 attachment
Posted on 9 years ago
#25
Guest
Loading...

From mlayton

That's the stuff. I usually just cover the parts in the dawn and add water and mix them up a bit.Mike

Is this the color blue you were taking about mike. Then it will turn green right???

1 attachment
Posted on 9 years ago
#26
Posts: 6170 Threads: 255
Loading...

Yep. It will change color some depending on how much rust you have.

Mike

Posted on 9 years ago
#27
Loading...

From Drumguy1988

Well I found Evapo-Rust. Just put a couple parts in it and we'll see what it does. Here's a pic. Do I need to cover the tray over with something or just leave it open???

Nope, just leave it open. You'll be amazed. If the parts aren't too severely rusted, you can use the same liquid again. Believe me, steel wool will dull the surface of any chrome part.

Brian

Just a drummer who loves all things about vintage drums! Nothing more, nothing less.
Posted on 9 years ago
#28
Guest
Loading...

From salty 1322

Nope, just leave it open. You'll be amazed. If the parts aren't too severely rusted, you can use the same liquid again. Believe me, steel wool will dull the surface of any chrome part. Brian

Thanks Brian. Already seeing a change. The rust falls off if I lightly rub it with my finger. I haven't done that to much cause I don't want to disturb the chrome

Posted on 9 years ago
#29
Posts: 1525 Threads: 127
Loading...

I just throw my parts that size in some dollar store white vinager overnight.

Takes the rust off. What doesn't fall off wipes right off.

Posted on 9 years ago
#30
  • Share
  • Report
Action Another action Something else here