The rapid strainer on my 70's slingerland is still working great but the rubber washer is starting to dry out and crack a little. Is there anything at all that I can do to preserve it and keep it from drying out any further? Thanks!
Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Rapid Strainer rubber washer drying out Last viewed: 7 hours ago
Posted on 13 years ago
#1
Posts: 6583
Threads: 644
Loading...
I think Home Despot and Lowes would have a black rubber washer that would work,if you are in the States.........
"Always make sure your front bottom BD lugs clear the ground!"
Posted on 13 years ago
#2
Posts: 6288
Threads: 375
Loading...
You can't take it off, or get one on without cutting it.
Which is OK if you really have to do it I guess.
There's a dad gum skinny metal washer looking thing attached to the adjustment screw just below where the rubber washer is that's not removable.
Kevin
Posted on 13 years ago
#3
Posts: 6583
Threads: 644
Loading...
Yeah,forgot to say...
you WILL need to put a THIN slice in the washer to get it on,but shouldn't pose any problems...........
"Always make sure your front bottom BD lugs clear the ground!"
Posted on 13 years ago
#4
Posts: 6288
Threads: 375
Loading...
Yeah,forgot to say...you WILL need to put a THIN slice in the washer to get it on,but shouldn't pose any problems...........
Yepper, brother......
Kevin
Posted on 13 years ago
#5
Posts: 14
Threads: 10
Loading...
Thanks for the info... The washer is still working and not totally shot yet. I wanted to try and preserve it with something but I hesitate treating it with anything until I know what is safe to use in order to keep it from drying out.
Posted on 13 years ago
#6
- Share
- Report