Posts
Rogers Drums Set Up
The tom arm mount placement is a step back into the 40s and is really reminiscent of the bass drum hoop mounted toms of that past era, this setup woul...
11 years agoXP8 musings
Not center cut double. The edge is offcenter toward the outside, and the outside slope is small.
11 years agoDayton Rogers kit
Late 1967 towards 1968. Value.. Depends on the day. Perhaps around 1200-1500 You are missing a cymbal knobby on the right side of the BD, that's what...
11 years agoJust picked up some Early Dayton Era Rogers Drums
Making that pearl thingy go away could be done with a chrome plate in place of it. Not much you can do with the holes, but worse things have been fixe...
11 years agoFullerton question
Big R five ply. 9/72 era, or the most of it, three ply. It is in the 1973 catalog... three ply shells. The idea that Rogers quality went south in 197...
11 years agoFullerton question
Damnit. Rogers quality did not go SOUTH with the end of Swivomatic.
11 years agoRogers Cleveland vs Dayton?
Is it possible to have a new urban legend concerning Rogers?
11 years agoJust scored a pristine Rogers Londoner 7 (without snare) for $350.
From DanC...
11 years agoFirst Rogers Snare - Powertone mystery year
That Fullerton Chrome is super shiny. I have a Powertone with the bordered tag, and a dyna in the 53000 range,... shiny.
11 years agoJust scored a pristine Rogers Londoner 7 (without snare) for $350.
Are your six digit numbers in the low D600000, D70000 range? and your five digit numbers... are all below D42000? These ranges of numbers were in use...
11 years agoJust scored a pristine Rogers Londoner 7 (without snare) for $350.
Good score....... gotta see pics!!!!
11 years agoJust what is the problem with Rogers Big 'R' drums?
I personally think the XP8 drums are some of the best built drums there were at the time. And perhaps, the best drums Rogers ever built. There weren't...
11 years agoVintage Rogers Drum kit
Agree on the second pic. That is a great picture. you just never know what is going to pop up on a drum forum.
11 years agoVintage Rogers Drum kit
Its a piece of cake. All you need is a drum key. Loosen and remove each tension rod on one head. The RIM will easily come off at that point. Remove...
11 years agoVintage Rogers Drum kit
There is nothing wrong with that drum. What you have is deteriorated foam weather striping that has fallen off the top head. Back in the 70s a company...
11 years ago