Posts
Ludwig drummer
I was cleaning out the music room, and came across some old Ludwig Drummer Magazines from the 60's -70's, I think. Before I chuck these, does anybody...
2 years agoRogers Collett Mounts
i have found that the “fingers” can wear a bit over time and don’t provide a good clamping action onto the hex rod or spur. i have been successful wi...
4 years agorogers tension rods
Well, i found this.... https://vintagedrumreference.com/tension-rods/snare-tom-key-rods/ I talked to a machinist friend of mine and he told me that...
4 years agorogers tension rods
When did Rogers change from the square headed tension rods to the ones with the little fillets / gussets? I have Cleveland era drums with the square...
5 years agoWanted: 12 in. rogers hoop
thanks blair for looking john
5 years agorogers lug mounting screw thread size
What is the machine screw thread size for Cleveland/Dayton rogers lugs? I am referring to the screws holding the lugs to the shell. thanks!
5 years agoWanted: 12 in. rogers hoop
Wanted: rogers 12 inch hoop, Dayton or Cleveland era (not tall boy). FOUND! (on ebay)
5 years agoWhat is this piece of hardware?
cymbal holder on the bass drum, second line style like this [ame]https://youtu.be/B0zJKf6tA5c[/ame]
5 years agoMaybe off-topic - mufflers on modern drum?
what about zero rings? you can cut 'em to adjust ring...
5 years agoWhat's the "weirdest" drum you've ever seen?
molecules drums are very weird
5 years agoRogers set screws
josh dw makes a near equivalent part nos. DWSM028. or DWSM029 john
7 years agoCrome refinishing referrals
Maybe try these guys Vernes plating http://www.verneschromeplating.com/contact.html They are in Gardena, CA, a suburb of Los Angeles. I used them...
8 years agoCamber T-Tops
Wanted: Camber T-tops in 1/4 in. US thread (not metric). These go on top of cymbal stands. I could use 5 or 6 of 'em John
8 years agowanted: rogers part
I am looking for the small chrome plated outer cover plate for a rogers internal tone control. It's a rectangular plate approx. 3/8 by 1-1/4 inches....
9 years agoMy 2nd Dynasonic on its way - question regarding rubber end caps
Magnus yes they do fit. if you pm me your mailing address, i will just send you four of 'em. save you the trouble john
10 years ago