Vintage Drum Forum the best vintage drum forum on the Internet - Vintage Drum History - Vintage Drum Questions

Go Back   Vintage Drum Forum > Restoring Vintage Drums

Reply
 
Thread Tools Display Modes
  #1  
Old 07-07-2019, 04:57 PM
marktech marktech is offline
Member
 
Join Date: Jun 2016
Location: Richmond, IN
Posts: 9
Default Work-In-Progress: Ludwig 15” Marching Snare in Gold Sparkle

Thanks for everyone’s comments on my Aluminum Badge RK! Your feedback actually encouraged me to set up another kit with that snare drum and play for a while… the RK had maintained its tuning and sounded great!

I gave this next item a sound check as well: a 12 X 15 Ludwig marching snare in gold sparkle (I was sure to double-check the Depth X Diameter spec – lol… and it needs a tune-up.). Another rescue – I saw this one at a local antique mall. It had suffered the indignity of having been pressed into service as a “wastebasket on wheels” – someone had actually cut a round piece of plywood, secured it against the bottom edge with the snare hoop and attached three small casters. It was missing everything except “most” of the lugs (one absent) and hoops & rods. When I got it apart I discovered two more lugs with the bosses broken off, hanging on to the shell literally by a thread. I don’t think the hoops are original – the batter hoop looks like a sticksaver (batter edge curls inward).

I installed these replacement parts: three Ludwig P2249D lugs, a P-86 strainer (I have a P-85 if I want it to be more original), P-32 butt, Puresound Custom wires (not as many choices out there for 15”), and Evans Onyx coated batter and Hazy 300 snare side heads. I had an extra rod & washer that were missing. I have not replaced the muffler – I filled the holes in the shell with the knob and the screw from a P40662 muffler that is not correct for this drum… the hole sizes in the shell are a clear indication of what goes where, and the P40662 has the knob and screw positions inverted from what is required (it appears to not be adaptable… what is the correct muffler part #?). I found a B/O replica badge and I need to do a better job of installing it. A cut down a cheap snare stand allows me to set this drum up with a kit.
Attached Thumbnails
Click image for larger version

Name:	01_Lud15Marcher_1.jpg
Views:	15
Size:	93.8 KB
ID:	126180   Click image for larger version

Name:	02_Lud15Marcher_2.jpg
Views:	12
Size:	94.1 KB
ID:	126181   Click image for larger version

Name:	03_Lud15Marcher_3.jpg
Views:	13
Size:	92.6 KB
ID:	126182   Click image for larger version

Name:	04_Lud15Marcher_edge.jpg
Views:	11
Size:	93.1 KB
ID:	126183  

Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:07 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright 2009 VSDwebdesign